--- title: "Metalworking fluids – are your workers at risk?" description: "Outbreaks of ill-health have occurred across the world in operators of plant using water-based metalworking fluids (MWFs). One such outbreak took place in 2005 at the Powertrain engineering plant in Birmingham where workers developed occupational asthma and extrinsic allergic al..." canonical: "https://www.safety-management.co.uk/news/metalworking-fluids-are-your-workers-at-risk" type: "Article" publishedAt: "2018-04-05T10:55:59" modifiedAt: "2020-09-28T15:32:11" keywords: "Uncategorised" --- # Metalworking fluids – are your workers at risk? Outbreaks of ill-health have occurred across the world in operators of plant using water-based metalworking fluids (MWFs). One such outbreak took place in 2005 at the Powertrain engineering plant in Birmingham where workers developed occupational asthma and extrinsic allergic al... Canonical URL: https://www.safety-management.co.uk/news/metalworking-fluids-are-your-workers-at-risk ## Article Outbreaks of ill-health have occurred across the world in operators of plant using water-based metalworking fluids (MWFs). One such outbreak took place in 2005 at the Powertrain engineering plant in Birmingham where workers developed occupational asthma and extrinsic allergic alveolitis. This incident lead to the withdrawal of all formal and guidance exposure limits for MWFs in the UK as the fundamental question of “What exposure level is regarded as safe?” could not be answered. Despite extensive research since that time the answer to this is still not known. So where does that leave us? The research has shown that the respiratory issues are caused, at least in part, by airborne endotoxins produced by bacteria in the sump. Blood tests carried out on operators have shown that their immune systems are regularly challenged, although ill health is generally avoided. It is therefore essential that MWFs are correctly managed and monitored for microbial growth, which may include legionella. For correct management and monitoring for microbial growth, dip slides should: - be taken weekly - be correctly incubated - be recorded and results and actions kept for at least 5 years Plotting the data graphically is the best option as trends can be identified more easily. Results of less than 103 CFU/ml (colony-forming units per ml of fluid) are acceptable. If the dip slides show 103 – 106 CFU/ml improvements are needed. This may involve changing the biocide regime or cleaning the sump for example. Results over 106 require immediate action – usually drain down, sump cleaning and fluid replacement. Sumps should be cleaned regularly – at least often enough to maintain control as shown by dip slides. Whilst these is no formal exposure limit for exposure to MWFs in the UK there is still a need to reduce exposures so far as is reasonably practicable. Good practice should usually allow exposures to be kept below 0.5 mg/m3, a limit still in place in the USA. Your assessment should consider if this is being achieved. If you require further advice, or assistance, [contact Dr Graham Newport at SML](/contact#contact-form). ## Related guidance - [Practical Health & Safety Support: Knowing Where to Start and What to Do Next](/news/practical-health-safety-support-knowing-where-to-start-and-what-to-do-next): Managing health and safety can feel straightforward when everything is running smoothly. Policies have been written, risk assessments have been completed, and there have been no recent incidents. However, many organisations reach a point where they begin to ask more fundamental... - [Why Retained Health & Safety Support Gives Leaders Greater Confidence](/news/why-retained-health-safety-support-gives-leaders-greater-confidence): For senior operations, health and safety and facilities leaders, the challenge is rarely a lack of documentation. Most organisations already have policies, risk assessments and procedures in place, and many have competent people responsible for maintaining them. The more difficu... - [How Workplace Safety Audits Help You Focus on What Actually Matters](/news/how-workplace-safety-audits-help-you-focus-on-what-actually-matters): A workplace safety audit is often associated with compliance, paperwork and preparing for inspections. While these are all important aspects of health and safety management, they are not the primary reason for carrying out an audit. The real value of a workplace safety audit UK... - [What Should You Do After a Near Miss in the Workplace? A Practical Guide for Businesses](/news/what-should-you-do-after-a-near-miss-in-the-workplace-a-practical-guide-for-businesses): A near miss in the workplace is an incident that had the potential to cause injury, ill health, damage to property or interruption to business operations but, fortunately, did not result in harm. While it may be tempting to regard these incidents as isolated events because no on... ## Explore local coverage - [Explore local coverage](/locations): Browse support across regions, towns, services and sectors. - [Health & Safety Consultancy in Bedfordshire](/services/health-safety/bedfordshire): Health & Safety Consultancy coverage linked to Bedfordshire businesses and surrounding towns. - [Engineering support in Bedfordshire](/sectors/engineering/bedfordshire): Engineering guidance connected to Bedfordshire operations and site risk. - [Health & Safety Consultancy in Bedford](/services/health-safety/bedfordshire/bedford): Health & Safety Consultancy support for Bedford and nearby areas including Luton, Dunstable.